SERVICE MODE TABLE
G104 5-46 SM
2912
[T2: SP: Size5] Transfer Roller Current: Correction for Humidity, Special paper,
Paper width A6 or less
(Environment, Process Speed, [Color]) LS: Low Speed, RS: Regular Speed
2912 001 LL: LS [K] *EGB [0 to 1275 / 200 / 5%/step]
2912 002 LL: LS [FC] *EGB [0 to 1275 / 200 / 5%/step]
2912 003 MM: LS [K] *EGB [0 to 1275 / 400 / 5%/step]
2912 004 MM: LS [FC] *EGB [0 to 1275 / 400 / 5%/step]
2912 005 HH: LS [K] *EGB [0 to 1275 / 200 / 5%/step]
2912 006 HH: LS [FC] *EGB [0 to 1275 / 200 / 5%/step]
2920 [S: HH SP: 1st] Smaller than A5 HH Special paper, 1
st
side
2920 001 T2 Switch Timing *EGB [0 to 200 / 15 / 1 mm/step]
2920 002 T2 Correction *EGB [0 to 1275 / 20 / 5%/step]
2921 [S: HH SP: 2nd] Smaller than A5 HH Special paper, 2
nd
side
2921 001 T2 Switch Timing *EGB [0 to 200 / 15 / 1 mm/step]
2921 002 T2 Correction *EGB [0 to 1275 / 0 / 5%/step]
2930
[Separa. : LE: HH] Separation Voltage: Correction for HH Humidity at the
Leading Edge
(Paper Type, Process Speed, [Color]) Paper Type -> Normal, Thin
Process Speed -> LS: Low speed, RS: Regular speed
2930 001 Normal: RS: [K] *EGB
2930 002 Normal: RS: [FC] *EGB
2930 003 Normal: LS: [K] *EGB
2930 004 Normal: LS: [FC] *EGB
2930 005 Normal 2: RS: [K] *EGB
2930 006 Normal 2: RS: [FC] *EGB
2930 007 Normal 2: LS: [K] *EGB
2930 008 Normal 2: LS: [FC] *EGB
2930 009 Thin: RS: [K] *EGB
2930 010 Thin: RS: [FC] *EGB
2930 011 Thin: LS: [K] *EGB
2930 012 Thin: LS: [FC] *EGB
[0 to 400 / 200 / 5%/step]
To Next Page
Loading...
