ENGINE SERVICE MODE
G104 5-88 SM
8521 [T: 2-2-15] *CTL
8524 [P: 2-2-15] *CTL
Print pages/ Finish post-print processing
The number of pages processed by the finisher
[0~9999999/ 0 / 1]
001 Sort 005 Z-Fold
002 Stack 006 Punch
003 Staple 007 Other
004 Booklet
• Even if the pages are too many for the finisher to staple, all pages are counted
(including unstapled pages).
• The counter of stapling (003) increases by +1 when the paper is transported from
the printer to the tray of the finisher. Even if a paper jam occurs on this path, the
counter (003) increases. If the same job is retried, the counter (003) increases
once again.
8531 [T: 2-2-16] *CTL Staples
The number of staples
[0~9999999/ 0 / 1]
8581 [T: 2-2-23] *CTL Total counter
The number of outputs in a specific color mode
[0~9999999/ 0 / 1]
001 Total 010 Total: Color
002 Total: Full Colo 011 Total: B/W
003 B&W/Single Color 012 Full Colour: A3
004 Development: CMY 013 Full Colour: ~B4
005 Development: K 014 Full Colour Prin
008 Print: Color 015 Mono Colour Prin
009 Print: B/W
8584 [P: 2-2-23] *CTL Print counter
The number of outputs in a specific color mode
[0~9999999/ 0 / 1]
8584 001 B/W 8584 003 Full Color
8584 002 Single Color
8591 [O: 2-2-23] *CTL Other counter
The number of A3/DLT, duplex printing, or staples
[0~9999999/ 0 / 1]
8591 001 A3/DLT 8591 001 Staple
8591 001 Duplex
• Note that these counters are not for the printer application program.
To Next Page
Loading...
