Ricoh G104 - Page 345

Service Call Conditions
SM 4-11 G160/G161
G160/G161
SC
[Level]
Symptom Possible Cause/Required Action
 Disconnected harness
 Defective high voltage power 1
1. Check the connectors.
2. Replace the PCU for black.
3. Replace the drum positioning plate.
4. Replace the high voltage power 1.
Charge AC bias error [M]
305
[D]
The charge current less than
200 µA is detected.
 Defective charge roller
 Defective connectors
 Disconnected harness
 Defective high voltage power 1
1. Check the connectors.
2. Replace the PCU for magenta.
3. Replace the drum positioning plate.
4. Replace the high voltage power 1.
Charge AC bias error [C]
306
[D]
The charge current less than
200 µA is detected.
 Defective charge roller
 Defective connectors
 Disconnected harness
 Defective high voltage power 1
1. Check the connectors.
2. Replace the PCU for cyan.
3. Replace the drum positioning plate.
4. Replace the high voltage power 1.
Charge AC bias error [Y]
307
[D]
The charge current less than
200 µA is detected.
 Defective charge roller
 Defective connectors
 Disconnected harness
 Defective high voltage power 1
1. Check the connectors.
2. Replace the PCU for yellow.
3. Replace the drum positioning plate.
4. Replace the high voltage power 1.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA