Service Mode Table
G160/G161 5-14 SM
1003 038 Tray 3: Thin: RS *EGB
1003 039 Tray 3: Special *EGB
1003 040 By-pass: N2: LS *EGB
1003 041 By-pass: N2: RS *EGB
1003 042 By-pass: Thick 2 *EGB
1003 043 By-pass: Thin: LS *EGB
1003 044 By-pass: Thin: RS *EGB
1003 045 By-pass: Special *EGB
1004
[Mt Speed] Drive Motor Speed DFU
(Unit, Process Speed, Paper Type)
Paper Type
N: Plain paper 1, N2 or Normal 2: Plain paper 2, Thick2: Thick
paper 2 (see the Specifications table for details on these paper weights)
Process Speed
LS: Low speed, RS: Regular speed
CW: Clockwise, CCW: Counterclockwise
PFU: Optional paper tray unit
1004 001 DEV / OPC [K]: LS *EGB
1004 002 DEV / OPC [K]: RS *EGB
Adjusts the black development and OPC
motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 003 DEV [CMY]: LS *EGB
1004 004 DEV [CMY]: RS *EGB
Adjusts the color development motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 005 OPC [CMY]: LS *EGB
1004 006 OPC [CMY]: RS *EGB
Adjusts the color OPC motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 007 Fusing: LS *EGB
1004 008 Fusing: RS *EGB
Adjusts the paper exit and fusing motor
speed.
[-4.00 to 4.00 / P2a: 1.4, P2b: 0.95 /
0.01%/step]
1004 009 Transfer Belt: LS *EGB
1004 010 Transfer Belt: RS *EGB
Adjusts the transfer belt motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 011 PFU: LS *EGB
Adjusts the speed of the feed motor in the
optional paper tray unit.
[-4.00 to 4.00 / P2a: -0.36, P2b: -1.06 /
0.01%/step]
1004 012 PFU: RS *EGB
[-4.00 to 4.00 / P2a: -0.36, P2b: -0.27 /
0.01%/step]
To Next Page
Loading...
