Service Mode Table
SM 5-113 G160/G161
G160/G161
5828 052 ECP *CTL
Switches the ECP setting for Centronics
off/on.
[0 or 1 / 1 / -]
0: Disabled, 1: Enabled
With “1” selected, SP5-828-050 must
be enabled for 1284 mode
compatibility.
5828 065 Job Spool *CTL
Switches the job spool on/off.
[0 or 1 / 0 / -]
0: Disabled, 1: Enabled
5828 066 HD job Clear *CTL
Selects the treatment of the job when a
spooled job exists at power on.
[0 or 1 / 1 / 1/step]
0: Data is cleared, 1: Automatically printed
5828 069 Job Spool (Protocol) *CTL
Switches job spooling off or on and enables
settings for job spooling protocols.
[0 or 1 / 1 / 1/step]
0: Off, 1: On
Bit switches:
Bit 0: LPR
Bit 1: FPT
Bit 2: IPP
Bit 3: SMB
Bit 4: Not used.
Bit 5: DIPRINT
Bits 6 and 7: Reserved
5828 090
TELNET (0: OFF, 1:
ON)
*CTL
Enables or disables Telnet.
[0 or 1 / 1 / 1/step]
0: Disabled, 1: Enabled
5828 091 Web (0: OFF, 1: ON) *CTL
Enables or disables the Web monitor.
[0 or 1 / 1 / 1/step]
0: Disabled, 1: Enabled
5828 145 Active IPv6 Link
Displays the IPv6 link local address for the
wireless LAN or Ethernet.
5828 147 Active IPv6 Stat (1) Displays the IPv6 stateless address 1 to 5 for
To Next Page
Loading...
