Service Mode Table
SM 5-115 G160/G161
G160/G161
of the range for each area. Adjust the upper 4
bits to set the maximum number of channels.
EU: [1 to 13 / 13 / 1/step]
NA/ AS: [1 to 11 / 11 / 1/step]
5840 007 Channel Min *CTL
Sets the minimum number of channels
available for data transmission via the
wireless LAN. The number of channels
available varies according to location. The
default settings are set for the minimum end
of the range for each area. Adjust the lower 4
bits to set the minimum number of channels.
EU: [1 to 13 / 1 / 1/step]
NA/ AS: [1 to 11 / 1 / 1/step]
5840 011 WEP Key Select *CTL
Selects the WEP key.
[00 to 11 / 00 / 1 binary]
00: Key #1
01: Key #2 (Reserved)
10: Key #3 (Reserved)
11: Key #4 (Reserved)
5842 [GWWS Analysis] Net File Application Analysis
5842 001 Setting 1 *CTL
Prints or does not print the module log for
each bit.
[0 or 1 / 1 / 1/step]
0: Prints, 1: Not print
Bit switches:
Bit 0: System or other related application.
Bit 1: Captured related application
Bit 2: Certification related application
Bit 3: Address related application
Bit 4: Control devices or transmission logs
related application
Bit 5: Output (print, fax or transmission)
related application
Bit 6: Documents related application in bit
7, 0: Not printed, 1: Printed
To Next Page
Loading...
