Service Mode Table
SM 5-117 G160/G161
G160/G161
This SP clears all the setting information managed in UCS and address book
information (local, delivery, LDAP) and restores these settings to their default
values. Use this SP to initial the account information (user codes and
passwords) for system managers and users as well.
Ini Local AddrB *CTL
5846 047
Clears the local address book information, including the user code.
Ini LDAP AddrB *CTL
5846 049
Clears the LDAP address book information, except the user code.
Init All AddrB *CTL
Initializes all address information data except
the administration account.
5846 050
Clears all directory information managed by UCS, including all user codes.
Turn off and on the main power switch after executing this SP.
Bkup All AddrB *CTL
5846 051
Uploads all directory information to the SD card.
Restr All AddrB *CTL
5846 052
Downloads all directory information from the SD card.
Clear Backup Info *CTL
5846 053
Deletes the address book data from the SD card in the service slot.
Deletes only the files that were uploaded from this machine.
This feature does not work if the card is write-protected.
After you do this SP, go out of the SP mode, and then turn the power off.
Do not remove the SD card until the Power LED stops flashing.
Search option *CTL
5846 060
This SP uses bit switches to set up the fuzzy search options for the UCS local
address book.
Bit: Meaning
Bit0: Checks both upper/lower case characters
Bit1: Japan Only
Bit2 to 7
Compl Opt1 *CTL
[0 to 32 / 0 / 1 /step]
5846 062
Use this SP to set the conditions for password entry to access the local
address book. Specifically, this SP limits the password entry to upper case and
sets the length of the password.
Note:
To Next Page
Loading...
