Ricoh G133 - Page 289

SC Table
SM 4-73 G133
Trouble-
shooting
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
during machine operation. This can be caused by switching the
machine off while it is operating.
Log Data Error 1
 Damaged log data file in the HDD
-001
Initialize the HDD with SP5832-004.
Log Data Error 2
 An encryption module not installed
-002
1. Disable the log encryption setting with SP9730-004 ("0" is off).
2. Install the DESS module.
Log Data Error 3
 Invalid log encryption key due to defective NVRAM data
-003
1. Initialize the HDD with SP5832-004.
2. Disable the log encryption setting with SP9730-004 ("0" is off).
Log Data Error 4
 Unusual log encryption function due to defective NVRAM data
-004
Initialize the HDD with SP5832-004.
Log Data Error 5
 Installed NVRAM or HDD which is used in another machine
-005
1. Reinstall the previous NVRAM or HDD.
2. Initialize the HDD with SP5832-004.
Log Data Error 99
 Other than the above causes
-099
Ask your supervisor.