SC Table
G133 4-74 SM
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD Data Overwrite Security SD card error
The 'all delete' function cannot be executed but the Data Overwrite
Security Unit (G874) is installed and activated.
Defective SD card (G874)
SD card (G874) not installed
877
CTL
D
1. Replace the NVRAM and then install the new SD card (G874).
2. Check and reinstall the SD card (G874).
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Electric counter error
Abnormal data in the counters.
Defective NVRAM
Defective controller
900
CTL
D
1. Check the connection between the NVRAM and controller.
2. Replace the NVRAM.
3. Replace the controller.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Printer application error
An error is detected in the printer application program.
Defective software
Unexpected hardware resource (e.g., memory shortage)
920
CTL
D
1. Software defective; switch off/on, or change the controller firmware
if the problem is not solved
2. Insufficient memory
To Next Page
Loading...
