SC Table
SM 4-75 G133
Trouble-
shooting
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Printer font error
A necessary font is not found in the SD card.
A necessary font is not found in the SD card.
The SD card data is corrupted.
921
CTL
D
Check that the SD card has the correct data.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Software performance error
The software makes an unexpected operation.
Defective software
Defective controller
Software error
1. Turn the main switch off and on.
2. Reinstall the controller and/or engine main firmware.
990
CTL
D
See Note 1 at the end of the SC table.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Software continuity error
The software has attempted to perform an unexpected operation.
However, unlike SC 990, the object of the error is continuity of the
software.
Software program error
Internal parameter incorrect, insufficient working memory.
991
CTL
C
1. This SC is not displayed on the LCD (logging only).
To Next Page
Loading...
