Service Mode Table
SM 5-17 G133
Service
Tables
058 Special 1: FC: Simplex *ENG
060 Special 1: FC: Duplex *ENG
062 Special 1: BW: Simplex *ENG
064 Special 1: BW: Duplex *ENG
[100 to 200 / 160 / 1°C/step]
066 Special 2: FC: Simplex *ENG
068 Special 2: FC: Duplex *ENG
070 Special 2: BW: Simplex *ENG
072 Special 2: BW: Duplex *ENG
[100 to 200 / 160 / 1°C/step]
074 Special 3: FC: Simplex *ENG
076 Special 3: FC: Duplex *ENG
078 Special 3: BW: Simplex *ENG
080 Special 3: BW: Duplex *ENG
[100 to 200 / 160 / 1°C/step]
Targ e t Te mp . A ft er
Ready
*ENG
[100 to 200 / 160 / 1°C/step]
082
Specifies the target temperature for the maintain mode after the machine has
reached the target temperature in warm-up mode.
Rec ove ry Ta rg e t Te mp. * EN G
[100 to 200 / 170 / 1°C/step]
083
Specifies the target temperature for the print mode without printing/copying job
after the machine's recovery.
Print Start: Offset *ENG
[0 to 100 / 5 / 1°C/step]
085
Specifies the paper feed start temperature. This value is the offset temperature
in relation to the target temperature for the print ready mode.
Feed Start: Offset *ENG
[0 to 100 / 5 / 1°C/step]
086
Specifies the image processing start temperature. This value is the offset
temperature in relation to the target temperature for the print ready mode.
To Next Page
Loading...
