Ricoh G133 - Page 340

Service Mode Table
G133 5-18 SM
089 Thick 3: FC: Simplex *ENG
091 Thick 3: BW: Simplex *ENG
[100 to 200 / 175 / 1°C/step]
093 Envelop: FC *ENG
094 Envelop: BW *ENG
[100 to 180 / 160 / 1°C/step]
095
Middle Thick: Middle
Speed: FC: Simplex
*ENG
097
Middle Thick: Middle
Speed: FC: Duplex
*ENG
099
Middle Thick: Middle
Speed: BW: Simplex
*ENG
101
Middle Thick: Middle
Speed: BW: Duplex
*ENG
[100 to 160 / 145 / 1°C/step]
103
Middle Thick: Constant
Speed: Offset
*ENG
[0 to 55 / 20 / 1°C/step]
Feed Start: Extra: Offset *ENG
[0 to 100 / 100 / 1°C/step]
104
Specifies the paper feed start offset temperature. This value is the offset
temperature in relation to the target temperature for the print ready mode.
Print Start: Extra: Offset *ENG
[0 to 100 / 100 / 1°C/step]
105
Specifies the image processing start offset temperature. This value is the offset
temperature in relation to the target temperature for the print ready mode.
Extra Rotation Temp.: L *ENG
[100 to 200 / 165 / 1°C/step]
106
Specifies the target temperature for extra idling mode in a low temperature
environment. The low temperature threshold can be adjusted with SP1112-003.
Extra Rotation Temp.: M *ENG
[100 to 200 / 160 / 1°C/step]
107
Specifies the target temperature for extra idling mode in a medium temperature
environment. The medium temperature is between the low temperature
threshold (SP1112-003) and the high temperature threshold (SP1112-004).