Ricoh G133 - Page 381

Service Mode Table
SM 5-59 G133
Service
Tables
016 M. Scan: High: Dot: Y *ENG
[-512 to 512 / 0 / 1 dot/step]
017 M. Scan: High: Subdot: Y *ENG
[-15 to 15 / 0 / 1 pulse/step]
018 M. Scan: Medium: Dot: Y *ENG
[-512 to 512 / 0 / 1 dot/step]
019
M. Scan: Medium: Subdot:
Y
*ENG
[-15 to 15 / 0 / 1 pulse/step]
020 M. Scan: Low: Dot: Y *ENG
[-512 to 512 / 0 / 1 dot/step]
021 M. Scan: Low: Subdot: Y *ENG
[-15 to 15 / 0 / 1 pulse/step]
022-039
Adjusts the sub-scan registration for each color and speed.
Decreasing a value makes the image shift to the leading edge side on the print.
Increasing a value makes the image shift to the trailing edge side on the print.
1 line = 42μm
022 S. Scan: High: Line: M *ENG
[-16384 to 16384 / 0 / 1 line/step]
023 S. Scan: High: Subline: M *ENG
[–1 to 1 / 0 / 0.001 /line]
024 S. Scan: Medium: Line: M *ENG
[-16384 to 16384 / 0 / 1 line/step]
025
S. Scan: Medium:
Subline: M
*ENG
[–1 to 1 / 0 / 0.001 /line]
026 S. Scan: Low: Line: M *ENG
[-16384 to 16384 / 0 / 1 line/step]
027 S. Scan: Low: Subline: M *ENG Not used
028 S. Scan: High: Line: C *ENG
[-16384 to 16384 / 0 / 1 line/step]
029 S. Scan: High: Subline: C *ENG
[–1 to 1 / 0 / 0.001 /line]
030 S. Scan: Medium: Line: C *ENG
[-16384 to 16384 / 0 / 1 line/step]
031
S. Scan: Medium:
Subline: C
*ENG
[–1 to 1 / 0 / 0.001 /line]
032 S. Scan: Low: Line: C *ENG
[-16384 to 16384 / 0 / 1 line/step]
033 S. Scan: Low: Subline: C *ENG Not used