Service Mode Table
G133 5-60 SM
034 S. Scan: High: Line: Y *ENG
[-16384 to 16384 / 0 / 1 line/step]
035 S. Scan: High: Subline: Y *ENG
[–1 to 1 / 0 / 0.001 /line]
036 S. Scan: Medium: Line: Y *ENG
[-16384 to 16384 / 0 / 1 line/step]
037
S. Scan: Medium:
Subline: Y
*ENG
[–1 to 1 / 0 / 0.001 /line]
038 S. Scan: Low: Line: Y *ENG
[-16384 to 16384 / 0 / 1 line/step]
039 S. Scan: Low: Subline: Y *ENG Not used
2183 [Main Scan Length Detection] DFU
001 Execute: High: Bk -
002 Execute: Medium: Bk -
003 Execute: Low: Bk -
004 Execute: High: M -
005 Execute: Medium: M -
006 Execute: Low: M -
007 Execute: High: C -
008 Execute: Medium: C -
009 Execute: Low: C -
010 Execute: High: Y -
011 Execute: Medium: Y -
012 Execute: Low: Y -
Executes the adjustment for the main scan
length detection manually.
2184 [Main Scan Length Detection Target] DFU
001 Execute: Bk - Executes the target value for the main scan
To Next Page
Loading...
