Ricoh G133 - Page 507

Service Mode Table
SM 5-185 G133
Service
Tables
021 Non-use Time Correction *ENG
[0 or 1 / 1 / 1 /step]
0: Not Correct (OFF), 1: Correct
(ON)
022
Correction Coefficient 1: JE:
BW
*ENG
[0 to 1 / 0.2 / 0.01 page/step]
023
Correction Coefficient 2: JE:
BW
*ENG
[0 to 1 / 1 / 0.01/step]
024 Correction Coefficient 1: JE: FC *ENG
[0 to 1 / 0.5 / 0.01/step]
025 Correction Coefficient 2: JE: FC *ENG
[0 to 1 / 1 / 0.01/step]
026
Correction Coefficient 1:
Interrupt: BW
*ENG
[0 to 1 / 0.1 / 0.01/step]
027
Correction Coefficient 2:
Interrupt: BW
*ENG
[0 to 1 / 1 / 0.01/step]
028
Correction Coefficient 1:
Interrupt: FC
*ENG
[0 to 1 / 0.25 / 0.01/step]
029
Correction Coefficient 2:
Interrupt: FC
*ENG
[0 to 1 / 1 / 0.01/step]
030
Max. Number Correction
Threshold
*ENG
[0 to 99 / 2 / 1/step]
031
Max. Number Correction
Counter
*ENG
[0 to 255 / 0 / 1/step]
[Image Quality Adj.: Interval]
3512
Adjusts the timing for execution of process control and line position
adjustment.
001 During Job *ENG
[0 to 100 / 30 / 1 page/step]
002 During Stand-by *ENG
[0 to 100 / 10 / 1 minute/step]