9. Troubleshooting Guide RICOH Ri 2000 User Manual
252
Press [NEXT].
[NEXT] can only be pressed with the front cover close.
※When canceling the maintenance at this time, detach the head protection cover and press
"CANCEL".
When [CANCEL] is pressed, the print head will be capped, and the maintenance will be completed.
However, please note that an error will occur if "CANCEL" is pressed while the head protection cover
is still attached.
Press [NEXT].
Proceed to step “24.Press [START]. Maintenance begins.” on page 247.
To Next Page
Loading...
