Shift Jogger Fence Retract HP Sensor
Preparation
• Shift tray jogger unit (page 22)
• Remove sensor [A] ( x1, x5)
• If it is difficult to remove the sensor directly from the frame (or re-install), do the procedure in
the previous section to remove the shift jogger retraction motor bracket.
Shift Tray Operation
Shift Tray Lift Motor
Preparation
Remove:
• Rear upper cover (page 15)
• Top rear cover (page 22)
• Proof tray (page 20)
1. The shift tray lift motor is near the left rear corner.
1. Replacement and Adjustment
78
To Next Page
Loading...
