Name: Rigol DS4024
Brand: Rigol
Rating: 4 (1 reviews)

To Next Page

To Previous Page

RIGOL Chapter 1 Quick Start

1-34 MSO4000/DS4000 User’s Guide

14. CH4 Status Label

 Display the on/off status of CH4. When it is on, the status label is

highlighted.

 Display the vertical scale of CH4 (namely the voltage value per grid of the

CH4 waveform in the vertical direction). You can use VIRTICAL

SCALE

under CH4 to modify this parameter.

 Different labels may be displayed according to the current channel setting.

For example,

is displayed when the channel coupling (refer to “To

Specify the Channel Coupling”) is AC;

is displayed when the

bandwidth limit (refer to “To Specify the Bandwidth Limit”) is enabled;

is displayed when the input impedance (refer to “To Specify the Input

Impedance”) is 50 Ω.

15. Message Box

Display the prompt messages.

16. Digital Channel Status Area

Display the current on/off statuses of the 16 digital channels (D15 to D0 from

left to right). The active digital channel is highlighted in red and the other digital

channels currently turned on are displayed in green. The digital channels turned

off are displayed in gray.

Note: This function is only applicable to MSO4000 series oscilloscope.

17. Notification Area

Display the system time, sound icon, USB storage device icon and PictBridge

printer icon.

 System Time: displayed in “hh:mm (hour:minute)” format. When printing

or storing the waveform, the output file will contain this time information.

Press Utility  System  System Time  System Time to set the

system time in the following format.

yyyy-mm-dd hh:mm:ss (year-month-date hour:minute:second)

 Sound Icon: when beeper is turned on,

is displayed. Press Utility 

Sound to turn the beeper on or off.

 USB Storage Device Icon: when the oscilloscope detects a USB storage

device, is displayed.

 PictBridge Printer Icon: when the oscilloscope is correctly connected to a

Rigol DS4024 User Manual

Other manuals for Rigol DS4024