49
Figure 45: Partition Failed to Arm Screen
Exit/Entry Delay
A partition that is defined with an Exit/Entry delay will be indicated on the screen
via a contour-line button. The time remaining will be displayed at the center of the
button. In addition, a beeping sound will be heard via the RisControl throughout
the Exit/Entry time.
Final Exit Zone
The Final Exit zone is the last detector to be activated on exit. When arming the
system, the related partition arms 10 seconds after this zone is closed to indicate
that the user has left the premises.
If the Final Exit zone was not closed after arming the system, the related partition
will not be armed and one second time remaining will be displayed at the center of
the button. In addition, a beeping sound will be heard via the RisControl
throughout the Final Exit time. In this case, leave the premises through the Final
Exit zone and close the door. The counter will restart, and the system will arm after
10 seconds have elapsed.
To Next Page
Loading...
Need help?
General
