99
9. KEY
When you press [DAT] in the basic measurement screen or in observation screens in functions such as
Stakeout, 2Pt RefLine, etc, the data in the current job is displayed.
Hold [DAT] for one second in the basic measurement screen or an observation screen to display the Data
Type screen. Through this screen you can change the type of data that is assigned to [DAT].
●To change the type of data that is assigned to [DAT], go to [MENU] →[6.1 Sec.]→[5.Data]
●For more information, see “11.4 VIEW RECORDS”.
To Next Page
Loading...