Rlide R2 Series - Program Functions; 2 Point Refline

66
e.
A
If you have taken a distance
measurement to the center of the
column, press the Calc softkey to
calculate the offset using one edge
angle observation.
B
Press [ENT] or [OK]. Sight the other
edge of the column, as shown in graph
B. It also calculates the coordinates of the
center point and the radius of the circle.
A：Press [Calc].
N:
29.369m
E:
25.566m
Z:
-14.177m
Rd=
5.369m
Redo
OK
B：
HA#
80°32’13”
VA#
94°56’15”
* Sight
2
OK
f.
In dialog box, if the result is satisfying,
press [OK], otherwise press [Redo].
[OK]
or
[Redo]
N:
29.369m
E:
25.566m
Z:
-14.177m
Rd=
5.369m
Redo
OK
g.
Enter a PT (and CD) value and press
[ENT], The target point is calculated and
recorded as an SS record.
Enter PT and
CD
[ENT]
Rec Pt
PT:
26
A
HT:
1.000m
CD:
List
Stac
 The calculated point (center of the circle) is stored as an SS record.
 If you press the +SD softkey before you sight Edge1, the input value is recorded at the end.
6.8 EXTEND THE SLOPE DISTANCE
STEP
OPERATION
DISPLAY
a.
In Page 2 of [Offset] menu, press [8]
enter the function for extending the slope
distance
[8]
Offset
1. CornerPt
2. Column
3. InputdSD
▲