Rlide R2 Series - Station Setup; Set Up Station with Known Points

32
4. KEY
To open the Station Setup menu, press in the BMS.
4.1 SET UP A STATION WITH KNOWN POINTS
4.1.1 Set up a Station with Known Coordinates
STEP
OPERATION
DISPLAY
a.
In [Stn Setup] menu press [1] to enter into
the function of using known point to set
station.
[1]
Stn Setup
1. Known
2. Rese
3. QuickStn
4. Z Coord
5. BS Check
b.
Input point name, and press [ENT]. ※
1)
Input point name
[ENT]
Input STN
ST:
1
A
HI:
0.000m
CD:
List
Stac
c.
Input height of instrument (HI), then
press [ENT].
To re input the known PtID，press [▲]
to move to the ST item, then input the
PtID.
Input height of
instrument
[ENT]
Input STN
ST:
1
A
HI:
1.000m
CD:
RUIDE
List
Stac