Rlide R2 Series - Remote Distance Measurement

71
g.
Sight the center of prism, and press
[MSR1] or [MSR2].
[MSR 1]/
[MSR 2]
Ref.Arc
1/5
STA#
O/S#
dZ#
* Sight Press [MSR]
h.
After measuring, the results display. ※3)
STA: Horizontal distance from P1 to the
measure point along the P1-P2 line
O/S:Horizontal offset from the P1-P2
line to the measured point
dZ: Vertical offset from the P1-P2 line to
the measured point
2 Pt.Ref.L
1/5
STA#
-2.231m
O/S#
-0.362m
dZ#
-0.327m
* Sight Press [MSR]
* Press [ENT] Rec.
i.
Press [ENT] to record.
[ENT]
Rec Pt
PT:
11
A
HT:
1.000m
CD:
List
Stac
※1) About method to input PtID, please refer to “2.8 METHOD TO INPUT PTID”.
※2) P2 can be any point on the tangent line that is to exit the curve.
※3) Press [▲]/[▼] or [DSP] to view other pages.
7.3 REMOTE DISTANCE MEASUREMENT
This function measures the horizontal distance, vertical distance, and slope distance between two
points.
User can select between two different methods:
MimRadial(A-B，A-C)
Mim Cont. (A-B，B-C)
rSD: Slope distance between two points
rHD：Horizontal distance between two points
rVD: Vertical distance between two points
RV%：rV% Percentage of grade (rVD/rHD) × 100%
rGD：Vertical grade (rHD/rVD)
rAZ：Azimuth from first point to second point
7.3.1 MimRadial
Measuring between the current and the first point measured.