a.
In the Code List press [Add].
b.
Enter the serial number in the CD field.
Input code content in Rec field. If you
leave the REC field blank, the CD value
is stored. After inputting, press [ENT].
※1), ※2)
Input CD and
content
[ENT]
c.
The added code appears in the code list.
※3)
※1) The Rec. field is optional, when you need to save a corresponding code to every serial number, you can input the code content in this field.
For example if you input“12” in “CD” field, and input “RUIDE” in “Rec”, it means you input RUIDE as a code, with the serial number 12.In Quick
Code function you can input serial number (CD) to call up code.
※2) To save the code same as the one in the CD field, leave the Rec field blank and press [ENT].
※3) You can store up to 256 codes.
11.5 1 SEC-KEYS
1 Sec.Keys are the functions that when you hold down a certain key for 1 second, the setting of this key
will be activated.
In the menu, press [6] to enter into the setting of [MSR], [Disp], [User], [SO] and [Data] keys.
11.5.1 [Meas] Key Setting
a.
In [Menu], press numeric key [6 ](or
use [▼]+[ENT]) to enter into 1 Sec. key
setting.
To Next Page
Loading...