Rlide R2 Series - 5 Key; Stake out Angle and Distance

46
5. KEY
To display the Stakeout menu, press .
5.1 STAKE OUT ANGLE AND DISTANCE
Specifying the stakeout point by angle and distance
STEP
OPERATION
DISPLAY
a.
Press numeric key [8] to enter into stake-
out function.
You should setup station and backsight
azimuth before stake-out. Otherwise the
screen displays as the right graph.
[8]
!
Station not set
1. Continue
2. Stn Setup
* Press [ESC] Abrt
b.
Press [Continue] to display ST, HI, and
BS set in last operation. Shown as the
right graph A. Press [OK] to confirm.
Press [STN] to enter “Stn Setup” menu.
Select one method to set station. Press
[Abrt] to quit the program.
STN Check
ST:
1
1
HI:
1.800m
BS:
2
Abrt
OK
c.
After the program record STN data,
screen returns to SO main menu.
SO
1. HA-HD
2. XYZ
3. PartLine
4. Ref.Line