Rlide R2 Series - Calculate a Corner Point

62
P1-P2=5.000（5.005）， P2-Tgt=2.000
6.4 +HA LINE
This function is to extend a line by horizontal angle offset.
STEP
OPERATION
DISPLAY
a.
In [Offset] menu, press [4] to enter the line
extension (+HA) function.
[4]
Offset
1. O/S Dist
2. O/S Ang.
3. O/S 2D
4. +HA Line
5. Input HD
▼
b.
Sight the first prism (or target), press
[MSR1]/[MSR2].
Sight the first
prism
[MSR1]/
[MSR2]
+HA
Line
<No.1>
1/5
HA#
15°42’13”
VA#
94°01’13”
SD#
* Sight Press [MSR]
OK
c.
Program enter measuring the second
point automatically. Sight the second
prism and press [MSR1]/[MSR2].
Sight the second
prism
[MSR1]/
[MSR2]
+HA
Line
<No.2>
1/5
HA#
83°19’14”
VA#
91°11’47”
SD#
* Sight Press [MSR]
OK
d.
Sight the alternative place on the same
vertical line as the desired target point.
+HA
Line
<No.2>
1/5
HA#
83°19’14”
VA#
91°11’47”
SD#
1.847m
* Sight <ALT> PT
OK
e.
Press [OK] or [ENT] to calculate the
coordinates and the raw data of the
target point
[OK]
or
[ENT]
+HA
Line
<No.2>
1/5
HA#
16°22’59”
VA#
36°11’39”
SD#
1.847m
* Sight <ALT> PT
O