Rlide R2 Series - Extend the Slope Distance

64
6.6 CALCULATE A CORNER POINT
STEP
OPERATION
DISPLAY
a.
In [Offset] menu, press [▼] to display the
second page of Offset. Press [6] to enter
the corner point function.
[6]
Offset
1. CornerPt
2. Column
3. InputdSD
▲
b.
Take a distance measurement to the
first prism on the wall. Press
[MSR1]/[MSR 2].
Sight the first
point
[MSR1]/
[MSR2]
CornerPt
<No.1>
1/5
HA#
86°20’55”
VA#
68°39’41”
SD#
* Sight Press [MSR]
OK
c.
Sight a second point on the same wall
and press [MSR1]/[MSR2].
Sight a second
point
[MSR1]/
[MSR2]
CornerPt
<No.2>
1/5
HA#
96°06’38”
VA#
56°36’52”
SD#
* Sight Press [MSR]
OK
d.
Sight the third point on the second wall
and press [MSR 1]/[MSR 2].
Sight the third
point
[MSR 1]/
[MSR 2]
CornerPt
<No.3>
1/5
HA#
110°10’05”
VA#
52°00’41”
SD#
* Sight Press [MSR]
OK
e.
If the two walls are at right angles, press
the Calc softkey to calculate the corner
point by three points.
If you take a measurement to a fourth
point, the corner point can be calculated
as the intersection of two walls (P1-P2
and P3-P4).
[Calc]
CornerPt
<No.4>
1/5
HA#
110°10’05”
VA#
52°00’41”
SD#
6.526m
* Press [MSR] or [Calc]
Calc