100
10. / KEY
If you use a certain function frequently in the field, you can assign it to the [USR1] or [USR2] key.
Whenever you press a [USR] key, the function which is predefined is activated directly.
The following functions can be assigned to the [USR] keys:
a.
In basic measurement screen, press
[USR1]/ [USR2] for 1 sec, the function
list of [USR] will display. (Here take
USR 1 as example.)
b.
Press [▲]/[▼] to highlight the function
and then press [ENT].※1), ※2)
If an item on the list has an arrow “→”
beside, and if you select this item, the
whole menu is assigned to the [USR]
key. To assign a specific function from
the sub-menu, press [▲]/[▼] to
highlight the function. Then press
[ENT].
c.
The screen returns to basic
measurement.
※1) The current predefined function is indicated by an asterisk (*) beside the function name.
※2) Once you have defined a function to a [USR] key, it is activated directly whenever you press that [USR]
key in the basic measurement screen.
To Next Page