Rlide R2 Series - General Settings

114
11.2.5 Input Coordinates Manually
STEP
OPERATION
DISPLAY
a.
In Cogo menu press key [5] (or use [▼]
+ [ENT]) to manually enter the XYZ
coordinates.
[5]
COGO
1. Inverse
2. AZ@Dist
3. Area
4. LineOff.
5. InputXYZ
b.
Enter the coordinates using the numeric
keys. To move to the next field, press
[ENT] or [▼] in a field.
Input
coordinates
[ENT]
N:
E:
Z:
PT:
10
CD:
c.
Press [ENT] in Z field to save the point
as manually input record. The display
returns to the point input screen. The
default PT is incremented to the next
value.
[ENT]
N:
10.000m
E:
10.000m
Z:
10.000m
PT:
10
CD:
List
Stac
11.3 SETTINGS
STEP
OPERATION
DISPLAY
a.
In [Menu], press numeric key [3] (or use
[▼] + [ENT]) to enter to setting function.
[3]
Menu
1.Job
6.1 Sec.
2.Cogo
7.Adjust
3.Set
8.Time
4.Data
9.Format
5.Comm
10.Info
b.
Use [▲]/[▼] + [ENT] or numeric key
to select the item which needs to be set.
(Here take angle setting as example.)
[1]
Settings
1.Angle
6.So
2.Dist
7.Unit
3.XYZ
8.Record
4.Power
9.Other
5.Comm