Rlide R2 Series - Appendix A: Design Road Line Data; Raw Data Format

149
【APPENDIX-A】DESIGN ROAD LINE DATA
1. RAW DATA
The format of data transmitted from total station to the PC is as follows:
RUIDE FORMAT: Take RTS item as example
Data Transferred to PC
Explanation
CO,Ruide Raw data
The type of transmitted data
CO,RTS
File name
CO,Description:
JOB description
CO,Client:
CO,Comments:
CO,Downloaded 2007-03-02 22:40:59
Download date and time
CO,Software: Pre-install version:07.03.02
Software version number
CO,Instrument: Ruide R2 115101
Serial number of instrument
CO,Dist Units: Metres
Distance unit
CO,Angle Units: DDDMMSS
Angle unit
CO,Zero azimuth: North
AZ Zero azimuth
CO,VA: Zenith
VA Zero azimuth
CO,Coord Order: NEZ
Coordinate order
CO,HA Raw data: HA zero to BS
HA
CO,Projection correction: OFF
Projection correction
CO,C&R correction: ON
C&R correction
CO,Tilt Correction: OFF
Tilt correction
CO,RTS <JOB> Created 2007-03-02 22:37:25
JOB creating time
MP,1,,10.000,10.000,1.000,VM
MP,5,,50.000,50.000,5.000,MP
Input coordinate manually，the
sequence is: pointID，N/E，E/N，
Z，code
CO,Temp:20.0 C Press:1013.2 hPa Prism:-30mm 2007.03.02
22:38:26
Temp, Press, Prism constant,
Date, Time
ST,1,,5,,1.600,45.0000,0.0000
Station data, the sequence is:
Station pointID, Backsight
pointID, height of instrument,
azimuth(AZ), horizontal angle
(HA)
F1,5,1.800,1.999,176.5958,99.2715, 23:26:28
Result of backsight point F1
orientation, the sequence is:
pointID, target height, slope
distance, horizontal angle,
vertical angle, time
SS,2,1.800,1.088,359.5959,62.4302, 22:38:45,MA
Target point measurement data,
the sequence is: PointID, target
height, slope distance, HA, VA,
code