Rlide R2 Series - Direction

45
4.5 CHECKING AND RESETTING THE BACKSIGHT DIRECTION
STEP
OPERATION
DISPLAY
a.
In [Stn Setup] press [5] to enter into
Backsight Check function.
[5]
Stn Setu
1. Known
2. Rese
3. QuickStn
4. Z Coord
5. BS Check
b.
Sight the BS point, and press [Redo] or
[ENT] to reset the horizontal angle to the
HA set in last station setup.
Press [Abrt] or [ESC] to cancel the
process and return to the basic
measurement screen.
Sight the BS
point
+
[Redo]/[ENT]
BS Check
HA#
0°00’00”
BS:
7°21’28”
* BS Check
Abrt
Redo
c.
Screen returns to the basic
measurement screen, and HA is set.
Display
2/5
AZ#
0°00’00”
HD#
SD#
PT:1
HT:
1.000m
**You must complete a station setup before you use the BS check function.