Rlide R2 Series - 3-Pt Reference Plane (S-Plane)

77
c.
Input the second point on the vertical
plane, and press [ENT].
InputP2
InputP2
P1:
1
1
P2:
2
Meas
List
Stac
d.
Once the plane is defined, the calculated
Sta and dZ values are updated as you
move the telescope. No distance
measurement is required.
STA：Horizontal distance from P1 to
the target point along the baseline
dZ: Vertical distance from P1 to the
target point
V-Plane
1/3
STA:
-3.815m
dZ:
-0.153m
* STA: is P1-P2 line
to P1 dist
2/3
V-Plane
2/3
N:
0.711m
E:
3.860m
Z:
-0.516m
* INT of collimator
and plane is XYZ
Press [▼] to display other pages. As
shown in the right graph.
V-Plane
3/3
HA#
78°45’19”
VA#
167°30’26”
* Press [ENT] Rec.
e.
To record the point, press [ENT] on any
screen. Input PT and CD and then press
[ENT] in the dialog box shown as the
right graph.
[ENT]
HA:
78°45’19”
VA:
167°30’26”
SD:
13.333m
PT:
221
CD:
List
Stac
※1) About method to input PtID, please refer to “2.8 METHOD TO INPUT PTID”.
7.6 3-PT REFERENCE PLANE (S-PLANE)
Measuring distance and offset values on the slope.