EasyManua.ls Logo

Rlide R2 Series - 7 Key; Point Refline

Default Icon
159 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
68
7. KEY
7.1 2 POINT REFLINE
STEP
OPERATION
DISPLAY
a.
In [Program] menu, press [1] to enter
2Pt.Ref.Line function.
[1]
Program
1. 2
Pt.Ref.L
2. Ref.Arc
3. MlmRadial
4. Mlm Cont.
5. REM
b.
Enter the first point for the reference line
P1. 1)
Input P1
Input P1
P1:
1
P2:
Meas
List
Stac
c.
Enter the second point for the reference
line.
Input P2
Input P2
P1:
1
1
P2:
Meas
List
Stac
d.
Sight the target and press [MSR1] or
[MSR2] to start measurement.
[MSR1]/
[MSR2]
2 Pt.Ref.L
1/5
STA#
O/S#
dZ#
* Sight Press [MSR]
e.
After measuring, the results display. 2)
STA: Horizontal distance from P1 to the
measure point along the P1-P2 line
O/S: Horizontal offset from the P1-P2
line to the measured point
dZ: Vertical offset from the P1-P2 line to
the measured point
2 Pt.Ref.L
1/5
STA#
1.247m
O/S#
-1.983m
dZ#
-0.414m
* Sight Press [MSR]
* Press [ENT] Rec.

Table of Contents