h.
The system records the station and raw
data to current job and finish setting up
station. The screen returns to basic
measurement screen. AZ item displays
the result of determining Backsight
azimuth.
4.2 MULTIPLE POINT RESECTION
A resection sets up the station using angle/distance measurements to known points.
--- You can use a maximum of 10 points in a resection.
--- Measurements can be distance and angle, or angle only.
--- Calculation starts automatically when enough measurements are taken.
--- You can delete poor observations and recalculate if necessary.
●If the angle between known point 1 and known point is extremely acute or extremely oblique, the resulting
solution will be less reliable geometrically. For geometric reliability, select known point locations (or station
point locations) that are widely spaced.
d.
Enter the point name for the first
observation point (PT1), and press
[ENT]. ※1)
To Next Page
Loading...