Rlide R2 Series - Coordinate Geometry (Cogo) Calculations

104
b.
Press [Ctrl]. A confirmation screen
appears.
[Control]
Ctrl
Job<ON>
A
Job:
R2-1207
* Set Ctrl job?
Abrt
OK
c.
Press [ENT] or [OK] to confirm,
otherwise cancel it by [ESC] or [Abrt]
and return to the previous screen. If a
control job is already assigned, the
newly assigned control job replaces it as
the control job.
[ENT]
or
[OK ]
JobMgr.
* RUIDE
17-01-20
MQ
17-01-25
@ R2-1207
17-01-25
SURVEY
17-01-26
New
Del
Ctrl
Info
d.
To clear the control job selected,
highlight the current control job in the job
list and press the [Ctrl] softkey.
Ctrl Job<OFF>
A
Job:
R2-1207
* Close Ctrl job?
Abrt
OK
11.1.5 Display Job Information
STEP
OPERATION
DISPLAY
a.
Highlight the job that you want to display
the information by pressing [▲]/[▼].
[▲]/[▼]
JobMgr.
* RUIDE
17-01-20
@ MQ
17-01-25
R2-1207
17-01-25
SURVEY
17-01-26
New
Del
Ctrl
Info
b.
The Job Info screen shows the number
of records in the job while pressing
[Info].
[Info]
Job Info
A
Job:
R2-1207
Rec: 1
Create: 2017-01-25
11.2 COORDINATE GEOMETRY (COGO) CALCULATIONS.
In the screen press [2] to show the menu, or access this menu from any observation or PT input screen.