103
To change the setting in the selected field, press [ ]/[ ]; To move between fields, press [▲]/[▼].
Alternatively, to move to the next field, press [Enter].
Create a new job automatically while pressing [Enter] in the last field.
11.1.3 Delete Jobs
a.
In the job list，move the cursor to the job
that you want to delete by [▲]/[▼].
b.
Confirm the job that you want to delete as
right screen.
c.
Press [Ent] or [OK] to delete the job. To
cancel the delete operation, press [ESC]
or [Abrt] and return to the previous
screen.
11.1.4 Set the Control Job
If you search for a point when a control job is specified, and the system cannot find the point in the current
job, the control job is also searched. If the point is found in the control job, it is copied to the current job as a
UP record.
A control job has the same format as a standard job. You can open and modify it like any other job, and
you can use it to record any measured data.
a.
Highlight the job that you want to use as
a control job by using by [▲]/[▼].
To Next Page
Loading...