Rlide R2 Series - Page 104

102
11.1.2 Create a New Job
STEP
OPERATION
DISPLAY
a.
Press [New ] in the job list.
[New]
JobMgr.
* RUIDE
17-01-20
@ MQ
17-01-25
R2-1207
17-01-25
SURVEY
17-01-26
New
Del
Ctrl
Info
b.
Enter a job name (within eight
characters), and press [Ent]. ※1)
Enter a job
name
[Enter]
Create
Job
A
Job:
* Max 8 char
c.
To confirm setting a new job, press [OK]
or [Enter]; To input a name again, press
[Abrt]; To check the settings of the job,
press [Set]. ※2)
[OK]
Or
[Enter]
Create
Job
A
Job:
RUIDE800
* Press [OK] create
[Set] use job set
Abrt
Set
OK
※1) Within 8 characters.
※2)If it is not necessary to change last setting, the current setting will pass to the new job while pressing [Enter] or [OK] to create a new job.
Job Settings
The following 12 settings are set when a job is created, and they can’t be changed. It is different from
other temporary settings. It ensures that the data in a job is correctly stored in the database and that all
necessary corrections are applied when you store each record.
Item
Option
Scale
0.99000 - 1.01000
T-Pcrn.
ON/OFF
SeaLevel
ON/OFF
C&R crn
OFF/0.14/0.200
Angle
DEG/GON/MIL
Dist
Meter/USA Feet/USA Inch/IntlFeet/IntlInch
Temp
°C / °F
Press
hPa/mmHg/inHg
VA 0
Zenith/ Vertical/Vert± 90
AZ 0
North/ South
Order
NEZ/ENZ
HA
Azimuth/0 to BS