Rlide R2 Series - 6 Key; Distance Offsets

58
6. KEY
6.1 DISTANCE OFFSETS
STEP
OPERATION
DISPLAY
a.
Press numeric key [9] to enter Offset
function.
You should setup station and backsight
azimuth before offset measurement.
Otherwise the screen displays as the
right graph.
[9]
!
Station not set
1. Continue
2. Stn Setup
* Press [ESC] Abrt
b.
Press [Continue] to display ST, HI, and
BS set in last operation. Shown as the
right graph A. Press [OK] to confirm.
Press [STN] to enter “Stn Setup” menu.
Select one method to set station. Press
[Abrt] to quit the program.
STN Check
ST:
1
1
HI:
1.800m
BS:
2
Abrt
OK
c.
After the program record STN data,
screen returns to Offset menu. Select
O/S Dist.
[1]
Offset
1. O/S Dist
2. O/S Ang.
3. O/S 2D
4. +HA Line
5. Input HD
▼
d.
If you have not taken a distance
measurement before entering this
function, a temporary measurement
screen appears. Sight the target and
press [MSR 1]/[MSR 2].
[MSR 1]/
[MSR 2]
HA#
15°42’13”
VA#
263°01’13”
SD#
HT:
1.000m
* Sight Press [MSR]
HT
OK