Rlide R2 Series - Two-Prism Pole

59
e.
Enter combination of distance offset to
specify the point.
After entering one item, press [ENT]
moving to the next.
Enter
combination of
distance offset to
specify the point.
O/S Dist
R/L:
1
O/I:
U/P:
* (+)=R (-)=L
f.
The calculated coordinates are shown.
Enter a PT and CD value, press [ENT] to
record. The display returns to BMS. ※1)
[ENT]
N:
10.000m
E:
10.000m
Z:
6.180m
PT:
221
CD:
List
Stac
※1) Raw data is also recalculated, based on the distance offset value.
6.2 MEASURING ANGLE OFFSETS
STEP
OPERATION
DISPLAY
a.
In [Offset] menu, press [2] to enter angle
offset function
[2]
Offset
1. O/S Dist
2. O/S Ang.
3. O/S 2D
4. +HA Line
5. Input HD
▼
b.
If you have not taken a distance
measurement before entering this
function, a temporary measurement
screen appears. Sight the target and
press [MSR 1]/[MSR 2].
[MSR 1]/
[MSR 2]
HA#
15°42’13”
VA#
77°52’27”
SD#
HT:
1.000m
* Sight Press [MSR]
HT
OK
c.
The measuring results are shown.
Press [DSP] or [▼] to view each dialog
box of the results.
[DSP]
or
[▼]
O/S Ang.
1/5
HA#
15°41’13”
VA#
77°52’27”
SD#
3.971m
Abrt
OK
d.
To take the angle offset, rotate the
alidade and telescope. The measured
distance (HD) remains unchanged.
O/S Ang.
1/5
HA#
25°09’01”
VA#
90°06’01”
SD#
3.971m
Abrt
OK