Rlide R2 Series - +HA Line Offset

60
e.
To record the offset point, press [OK],
and otherwise press [Abrt].
The XYZ data is also recalculated
based on the new angle. In the dialogue
box of results calculated by the
program, press [ENT] Rec.
[OK]
HA:
25°09’01”
VA:
90°06’01”
SD:
2.228m
PT:
1
CD:
List
Stac
f.
The display returns to basic
measurement screen.
Display
1/5
HA#
30°21’50”
VA#
273°13’45”
SD#
PT:222
HT:
1.000m
You can record an angle offset in the basic measurement screen.
STEP
OPERATION
DISPLAY
a.
In basic measurement screen, press
[MSR 1] or [MSR 2].
[MSR1]/
[MSR2]
Display
1/5
HA#
1°21’50”
VA#
273°13’45”
SD#
2.309m
PT:222
HT:
1.000m
b.
After taking a distance measurement,
rotate the alidade and/or telescope.
Press [DSP] or [▼] to view other pages
of the result. You can see that the
coordinates are changed with the
change of angle.
Display
1/5
HA#
35°55’36”
VA#
78°26’10”
SD#
2.309m
PT:222
HT:
1.000m
c.
Then press [ENT] to record the
measured distance with the updated
angle value.
[ENT]
Rec Pt
PT:
26
A
HT:
1.800m
CD:
List
Stac