Rlide R2 Series - Page 49

47
d.
Press [1] to display the input screen for
the distance and angle to the target.
Enter the values and press [ENT].
HD：Horizontal distance from station
point to stakeout point dVD：Vertical
distance from station point to stakeout
point
HA: Horizontal angle to stakeout point
※1)
[1]
HA-HD
HD:
1
dVD:
HA:
e.
Start staking out. First Rotate the
instrument until the dHA displays as
0°00′00″.
SO
dHA
10°00’00”
HD:
1.000m
* Sight Press [MSR]
OK
f.
Sight the target and press [MSR1] or
[MSR2] to start measuring.
[MSR 1]/
[MSR 2]
SO
dHA
0°00’00”
HD:
1.000m
* Sight Press [MSR]
OK
g.
When the measurement is completed,
the differences between the target
position and the stakeout point are
displayed. ※2), ※3)
dHA: Difference in horizontal angle to
the target point
R/L: Right/Left (Lateral error)
IN/OUT: In/Out (Longitudinal error)
CUT/FIL: Cut/Fill
SO
1/8
dHA
0°00’00”
STP
0.000m
IN
0.971m
FIL
0.743m
* Press [ENT] Rec
h.
Move the prism forward or backward
according to the arrowhead until IN/OUT
field displaying 0 m,
：moving towards to station
：moving away from station
SO
1/8
dHA
0°00’00”
STP
0.000m
IN
0.000m
FIL
0.201m
* Press [ENT] Rec