Rlide R2 Series - Page 50

48
i.
When both R/L and IN/OUT display 0m,
it indicates the prism is on the stakeout
point.
The fifth line shows the data of fill or dig.
SO
1/8
dHA
0°00’00”
STP
0.000m
IN
0.000m
FIL
0.201m
* Press [ENT] Rec
j.
After staking out, your can press [ENT]
to record the stakeout point. PT defaults
to the last recorded PT+1, you can input
code if necessary. Press [ENT] to record
the point.
N:
10.000m
E:
10.000m
Z:
6.180m
ST:
221
CD:
List
Stac
k.
After recording the point, it returns to the
observation screen. You can continue
observation, or press [ESC] to input
another angle and distance for stakeout.
HA-HD
HD:
1
dVD:
HA:
※1) If you press [ENT] without entering HA, the current HA is used.
※2) Once a measurement is taken; the Cut/Fill value and Z coordinate are updated as the VA is changed.
※3) All observation results display in 8 pages, press [▼] or [DSP] to switch between display screens.
DISPLAY
DESCRIPTION
SO
1/8
dHA
0°00’00”
STP
0.000m
IN
0.971m
FIL
0.743m
* Press [ENT] Rec
This page displays stake-out.
SO
2/8
HA:
15°42’13”
VA:
20°42’05”
SD:
2.359m
* Press [HOT] Change
HT
This page displays the slant distance
measurement of target prism. Press
[HOT] to enter into HOT Key menu.