Rlide R2 Series - Page 33

31
[MODE]
CD:
1/4
HA#
20°00’00”
VA#
273°13’45”
SD#
PT:1
HT:
1.000m
b.
Input the serial numbers of Quick Code,
which should be Arabic numbers, and
then press [ENT].
Input the serial
numbers of
Quick Code
[ENT]
CD: 10
1/4
HA#
20°00’00”
VA#
273°13’45”
SD#
PT:1
HT:
1.000m
c.
Program starts code searching to search
the quick coding in internal memory. To
find the quick coding corresponding to
the code, press [MSR1], after measuring
the result and Quick Code are displayed.
If the quick code corresponding to the
code doesn’t exist in internal memory, it
will display “Code no exist” ※1)
CD: 10
1/4
HA#
20°00’00”
VA#
273°13’45”
SD#
PT:1
HT:
1.000m
d.
While finishing measurement, the found
code is called up, and screen displays a
dialog box for result recording. “CD”
column shows the found code. ※2)
Rec Pt
PT:
26
HT:
1.000m
CD:
FANGJIAO
List
Stac
※1) If no quick code is allocated to the codes, the code is numbered in accordance with the order in which
the codes were entered in the code list, so you can enter serial numbers to call up quick codes.
※2) To quit Quick Code function, press [MODE] again.