Rlide R2 Series - Page 124

122
c.
Detailed data for the selected record
appears. Press [ESC] to return to the
list. Press [Dsp] to change the fields
shown. ※2), ※3)
RAW Data
SS,10,
SS,11,
SS,9,V
SS,5
Del
Edit
Srch
※1) If you select a type in the Type item, you do not have to enter a value in the CD item. Press [ENT] in the PT
item to start the search.
※2) If more than one point matches the search criteria, the matching points are displayed in a list. Use [▲]/ [▼] to
highlight the point you want to use. Then press [ENT] to select it.
※3) If no point matches the specified criteria, “PT Not Exist” displays. Press any key to return to the data screen.
11.4.5 View Coordinates Data
In Data menu press [2: XYZ Data], then coordinate data is displayed in a list, with the newest record at the
bottom of the screen. Use [▲]/[▼] to scroll through the records. (Use [ ]/[ ] to move up or down one
page), press [ENT] to see more detailed information.
The header (XYZ, YXZ, NEZ or ENZ) depends on the Coord.
STEP
OPERATION
DISPLAY
a.
In Data menu press numeric key [2],
choosing XYZ Data.
[2]
View/Edit
1. Raw
Data
2. XYZ
Data
3. ST→SS/SO/CP
4. PT List
5. Cod
List
b.
The XYZ data list is open. The cursor
stays on the last coordinate record of
current job. Use [▲]/[▼] to scroll
through the records. ※1), ※2)
[▲]/[▼]
XYZ Data
SS,10,
MP,10,
SS,9,V
MP,5
Del
Edit
Srch
Inp.
c.
After selecting the XYZ Data you want to
view, press [ENT] to see more detailed
information. Press [ESC] to return to the
list. ※3)
[ENT]
N:
10.000m
E:
10.000m
Z:
10.000m
PT:
5
CD:
RUIDE
Del
Edit