Rlide R2 Series - Page 128

126
11.4.9 Enter Coordinates
STEP
OPERATION
DISPLAY
a.
In XYZ Data menu, press [Input].
[Input]
XYZ Data
SS,10,
MP,10,
SS,9,V
MP,5
Del
Edit
Srch
Inp.
b.
A new input point screen. Displays. The
PT field defaults to the last recorded PT
+ 1, but you can change the value
shown. Enter the coordinates and the PT
and CD and then press [ENT]. When
you press [ENT] in the CD field, the point
is stored as an MP record.
Input new data
+
[ENT]
N:
10.000m
E:
Z:
PT:
6
CD:
c.
After you have recording a point, the
next point input screen is shown with the
updated default You can record NE,
NEZ, or Z data to the database.
N:
E:
Z:
PT:
7
CD:
11.4.10 ViewRecords by Station
STEP
OPERATION
DISPLAY
a.
In Data menu press numeric key [3] to
select ST→SS/SO/CP.
[3]
View/Edit
1. Raw
Data
2. XYZ
Data
3. ST→SS/SO/CP
4. PT List
5. Cod
List
b.
Station Data list shows. Use [▲]/[▼]
to scroll through the records.
[▲]/[▼]
Stn Data
ST,10,
ST,15,
ST,16,
ST,19,
Del
Edit
Srch