Rlide R2 Series - Page 13

11
b.
Press [6] 3 times to input R.
Press [1] 3 times to input U.
Press [9] 3 times to input I.
Press [8] once to input D.
Press [8] twice to input E.
[6]
[1]
[9]
[8]
[8]
Input STN
ST:
RUIDE
A
HI:
1.000m
CD:
RUIDE
List
Stac
c.
Press [MODE] to shift the inputting mode
to number inputting.
[MODE]
Input STN
ST:
RUIDE
1
HI:
1.000m
CD:
RUIDE
List
Sta
d.
Press [8] and [0]. ※1)
[8]
[0]
Input STN
ST:
RUIDE800
1
HI:
1.000m
CD:
RUIDE
List
Stac
e.
After inputting, press [REC/ENT] to
confirm.※2)
[REC/ENT]
※1) The maximum length of character of point ID or point number is 16.
※2) If the point ID is wrong, press [ESC] and input again.
2.7.2 Edit Characters
Characters that have been input can be edited.
STEP
OPERATION
DISPLAY
a.
Move the cursor to the item that needs to
be edited, and press [ ], the cursor will
stay on the first character and twinkle.
[ ]
Input STN
ST:
RUIDE800
A
HI:
1.000m
CD:
RUIDE
List
Stac
b.
Press [ ] to move the cursor to the
character that needs to be edited. ※1)
[ ]
Input STN
ST:
RUIDE800
A
HI:
1.000m
CD:
RUIDE
List
Stac