Rlide R2 Series - Page 130

128
11.4.12 Edit Station Records
The system will not recalculate the measurements if you change the station record.
●If you change the station or instrument height (HT) values, the coordinates of observation points are not
recalculated.
●If you change the BS or AZ values, raw records are not recalculated.
STEP
OPERATION
DISPLAY
a.
In Stn Data list, use [▲]/[▼] to highlight
the record that you want to edit. (Or in
data screen which appears after
pressing [ENT].) Press [Edit].
[▲]/[▼]
[Edit]
Stn Data
ST,10,
ST,15,
ST,16,
ST,19,
Del
Edit
Srch
Press[ENT]:
ST:
19
HI:
1.600m
BS:
20
AZ:
0°00’00”
* Press [ENT] View
Del
Edit
Dsp
b.
Program displays as the right graph.
Input the new data manually, or select
data from [List] or [Stac], and then press
[ENT]. ※1)
Input new data
[ENT]
ST:
19
HI:
1.600m
BS:
20
AZ:
0°00’00”
* Amend & Press [ENT]
List
Stac
c.
To rewrite the data, press [OK] or [ENT].
Otherwise press [CE].
[OK]
or
[ENT]
Edit RAW
ST,19,
* Rewrite?
CE
OK
d.
The system executes the selected
operation, and returns to RAW Data
screen.
Stn Data
ST,10,
ST,15,
ST,16,
ST,19,
Del
Edit
Srch
※1) You can’t edit the current station.