Rlide R2 Series - Refline Stakeout

54
STEP
OPERATION
DISPLAY
a.
In SO menu press [3] to enter into
PartLine SO function.
[3]
SO
1. HA-HD
2. XYZ
3. PartLine
4. Ref.Line
b.
Set up the baseline. Sight the target,
and press [MSR1]/[MSR2] to start
survey. System set up a base line
between the instrument and the
measured point.
[MSR 1]/
[MSR 2]
PartLine
HA#
123°41’23”
HD#
2.030m
* Sight Press [MSR]
c.
Enter the total stake number in Partition
field, and press [ENT]. ※1)
Enter the total
stake number
[ENT]
PartLine
HA#
123°41’23”
HD#
2.030m
Partition:
d.
The observation screen for the first
stake (from the instrument) appears.
Sight the prism and press [MSR1]/
[MSR 2].
Sight the first
stake out point
+
[ENT]
PartLine
<1/3>
HD:
0.667m
L
Out
Prev
Next
e.
When the measurement is completed,
the differences between the target
position and the stakeout point are
displayed. ※2), ※3)
HA: Difference in horizontal angle to the
target point
R/L: Right/Left (Lateral error)
IN/OUT: In/Out (Longitudinal error)
PartLine
<1/3>
HD:
0.667m
STP
0.000m
Out
0.058m
* Press [ENT] Rec
Prev
Next
f.
Ask the rodman to adjust the target
position. When the target is on the
intended position, the displayed errors
become 0 m.
：moving towards to station
：moving away from station
PartLine
<1/3>
HD:
0.667m
STP
0.000m
STP
0.000m
* Press [ENT] Rec
Prev
Next