b.
Select “1.HZ Alignment” to enter into
define HZ Alignment function.
c.
Select “Define HZ AL”.
d.
Input the chainage of start point, and N,
E coordinates. After finishing one item,
press [ENT] to move to the next item.
Input chainage
of start point, N,
E coordinates
[ENT]
e.
The display enters to the Define HZ
alignment main menu.
Straight Line
When the start point or other line type is defined, user can define line. A line consists of azimuth angle and
distance. The distance value can not be negative.
a.
In Define HZ AL screen press [Str] to
enter into the straight line defining menu.
To Next Page
Loading...