Rlide R2 Series - Page 85

83
c.
The display returns to alignment defining
main menu, and displays chainage of
end point of the arc and azimuth of this
point.
Define HZ
AL
02
CH:
20.000
AZ:
85°22’30”
Str
Arc
Trns
Pt
Transition
In Define HZ AL screen press [Trns] to define transition. A transition consists of the minimum radius and arc
length. The rule of radius value is same as the rule of radius value. Similarly, the arc length can’t be negative.
STEP
OPERATION
DISPLAY
a.
In Define HZ AL screen press [Trns] to
enter into defining transition screen.
[Trns]
Define HZ
AL
01
CH:
1.000
AZ:
0°00’00”
Str
Arc
Trns
Pt
b.
Input radius and arc length, and press
[ENT] to record this data.
Input radius and
arc length
[ENT]
Transition
02
Rad:
Len:
c.
The display returns to alignment defining
main menu, and displays chainage of
end point of the transition and azimuth of
this point.
Define HZ
AL
01
CH:
15.000
AZ:
73°42’17”
Str
Arc
Trns
Pt